Test two objects for inequality.

Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

Concatenates this iterator with another.

The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

Sends an abort signal to other workers.

Abort flag being true means that a worker can abort and produce whatever result, since its result will not affect the final result of computation. An example of operations using this are find, forall and exists methods.

Appends all elements of this traversable or iterator to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable or iterator without any separator string.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> val h = a.addString(b)
h: StringBuilder = 1234

Appends all elements of this traversable or iterator to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable or iterator, separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b, ", ")
res0: StringBuilder = 1, 2, 3, 4

Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this traversable or iterator are separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b , "List(" , ", " , ")")
res5: StringBuilder = List(1, 2, 3, 4)

Aggregates the results of applying an operator to subsequent elements.

This is a more general form of fold and reduce. It is similar to foldLeft in that it doesn't require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.

aggregate splits the traversable or iterator into partitions and processes each partition by sequentially applying seqop, starting with z (like foldLeft). Those intermediate results are then combined by using combop (like fold). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so combop may be invoked an arbitrary number of times (even 0).

As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, seqop transforms each input character to an Int and adds it to the sum (of the partition). Then, combop just needs to sum up the intermediate results of the partitions:

List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })

Cast the receiver object to be of type T0.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

Creates a buffered iterator from this iterator.

Create a copy of the receiver object.

The default implementation of the clone method is platform dependent.

Creates an iterator by transforming values produced by this iterator with a partial function, dropping those values for which the partial function is not defined.

Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether this iterator contains a given value as an element.

Note: may not terminate for infinite iterators.

Copies selected values produced by this iterator to an array. Fills the given array xs starting at index start with at most len values produced by this iterator. Copying will stop once either the end of the current iterator is reached, or the end of the array is reached, or len elements have been copied.

Note: will not terminate for infinite iterators.

Copies the elements of this traversable or iterator to an array. Fills the given array xs with values of this traversable or iterator. Copying will stop once either the end of the current traversable or iterator is reached, or the end of the target array is reached.

Note: will not terminate for infinite iterators.

Copies the elements of this traversable or iterator to an array. Fills the given array xs with values of this traversable or iterator, beginning at index start. Copying will stop once either the end of the current traversable or iterator is reached, or the end of the target array is reached.

Note: will not terminate for infinite iterators.

Copies all elements of this traversable or iterator to a buffer.

Note: will not terminate for infinite-sized collections.

Tests whether every element of this iterator relates to the corresponding element of another collection by satisfying a test predicate.

Counts the number of elements in the traversable or iterator which satisfy a predicate.

Drop implemented as simple eager consumption.

Skips longest sequence of elements of this iterator which satisfy given predicate p, and returns an iterator of the remaining elements.

Creates a copy of this iterator.

Creates two new iterators that both iterate over the same elements as this iterator (in the same order). The duplicate iterators are considered equal if they are positioned at the same element.

Given that most methods on iterators will make the original iterator unfit for further use, this methods provides a reliable way of calling multiple such methods on an iterator.

Tests whether the argument (that) is a reference to the receiver object (this).

The eq method implements an equivalence relation on non-null instances of AnyRef, and has three additional properties:

• It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false.
• For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
• null.eq(null) returns true.

When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

The equality method for reference types. Default implementation delegates to eq.

See also equals in scala.Any.

Tests whether a predicate holds for some of the values produced by this iterator.

Note: may not terminate for infinite iterators.

Returns an iterator over all the elements of this iterator that satisfy the predicate p. The order of the elements is preserved.

Creates an iterator over all the elements of this iterator which do not satisfy a predicate p.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the finalize method is invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

Finds the first value produced by the iterator satisfying a predicate, if any.

Note: may not terminate for infinite iterators.

Creates a new iterator by applying a function to all values produced by this iterator and concatenating the results.

Folds the elements of this traversable or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite iterators.

Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Tests whether a predicate holds for all values produced by this iterator.

Note: may not terminate for infinite iterators.

Applies a function f to all values produced by this iterator.

Returns the runtime class representation of the object.

Returns an iterator which groups this iterator into fixed size blocks. Example usages:

// Returns List(List(1, 2, 3), List(4, 5, 6), List(7)))
(1 to 7).iterator grouped 3 toList
// Returns List(List(1, 2, 3), List(4, 5, 6))
(1 to 7).iterator grouped 3 withPartial false toList
// Returns List(List(1, 2, 3), List(4, 5, 6), List(7, 20, 25)
// Illustrating that withPadding's argument is by-name.
val it2 = Iterator.iterate(20)(_ + 5)
(1 to 7).iterator grouped 3 withPadding it2.next toList

Tests whether this Iterator has a known size.

Tests whether this iterator can provide another element.

The hashCode method for reference types. See hashCode in scala.Any.

Returns the value of the index flag.

The index flag holds an integer which carries some operation-specific meaning. For instance, takeWhile operation sets the index flag to the position of the element where the predicate fails. Other workers may check this index against the indices they are working on and return if this index is smaller than their index. Examples of operations using this are takeWhile, dropWhile, span and indexOf.

Returns the index of the first occurrence of the specified object in this iterable object after or at some start index.

Note: may not terminate for infinite iterators.

Returns the index of the first occurrence of the specified object in this iterable object.

Note: may not terminate for infinite iterators.

Returns the index of the first produced value satisfying a predicate, or -1, after or at some start index.

Note: may not terminate for infinite iterators.

Returns the index of the first produced value satisfying a predicate, or -1.

Note: may not terminate for infinite iterators.

Checks whether an abort signal has been issued.

Abort flag being true means that a worker can abort and produce whatever result, since its result will not affect the final result of computation. An example of operations using this are find, forall and exists methods.

Tests whether this iterator is empty.

Test whether the dynamic type of the receiver object is T0.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

For most collections, this is a cheap operation. Exceptions can override this method.

Tests whether this Iterator can be repeatedly traversed.

Returns the number of elements in this iterator.

Note: will not terminate for infinite iterators.

Creates a new iterator that maps all produced values of this iterator to new values using a transformation function.

Finds the largest element.

Finds the first element which yields the largest value measured by function f.

Finds the smallest element.

Finds the first element which yields the smallest value measured by function f.

Displays all elements of this traversable or iterator in a string.

Displays all elements of this traversable or iterator in a string using a separator string.

Displays all elements of this traversable or iterator in a string using start, end, and separator strings.

Equivalent to !(this eq that).

Produces the next element of this iterator.

Tests whether the traversable or iterator is not empty.

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

Appends an element value to this iterator until a given target length is reached.

Partitions this iterator in two iterators according to a predicate.

Returns this iterator with patched values. Patching at negative indices is the same as patching starting at 0. Patching at indices at or larger than the length of the original iterator appends the patch to the end. If more values are replaced than actually exist, the excess is ignored.

Multiplies up the elements of this collection.

Reduces the elements of this traversable or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this traversable or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

The number of elements this iterator has yet to traverse. This method doesn't change the state of the iterator.

This method is used to provide size hints to builders and combiners, and to approximate positions of iterators within a data structure.

Note: This method may be implemented to return an upper bound on the number of elements in the iterator, instead of the exact number of elements to iterate. Parallel collections which have such iterators are called non-strict-splitter collections.

In that case, 2 considerations must be taken into account:

1) classes that inherit ParIterable must reimplement methods take, drop, slice, splitAt, copyToArray and all others using this information.

2) if an iterator provides an upper bound on the number of elements, then after splitting the sum of remaining values of split iterators must be less than or equal to this upper bound.

Tests if another iterator produces the same values as this one.

Note: will not terminate for infinite iterators.

Produces a collection containing cumulative results of applying the operator going left to right, including the initial value.

Note: will not terminate for infinite iterators.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite iterators.

Note: might return different results for different runs, unless the underlying collection type is ordered.

A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).

This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.

Sets the value of the index flag.

The index flag holds an integer which carries some operation-specific meaning. For instance, takeWhile operation sets the index flag to the position of the element where the predicate fails. Other workers may check this index against the indices they are working on and return if this index is smaller than their index. Examples of operations using this are takeWhile, dropWhile, span and indexOf.

Sets the value of the index flag if argument is greater than current value. This method does this atomically.

The index flag holds an integer which carries some operation-specific meaning. For instance, takeWhile operation sets the index flag to the position of the element where the predicate fails. Other workers may check this index against the indices they are working on and return if this index is smaller than their index. Examples of operations using this are takeWhile, dropWhile, span and indexOf.

Sets the value of the index flag if argument is lesser than current value. This method does this atomically.

The index flag holds an integer which carries some operation-specific meaning. For instance, takeWhile operation sets the index flag to the position of the element where the predicate fails. Other workers may check this index against the indices they are working on and return if this index is smaller than their index. Examples of operations using this are takeWhile, dropWhile, span and indexOf.

A delegate that method calls are redirected to.

The size of this traversable or iterator.

Note: will not terminate for infinite-sized collections.

The size of this collection or iterator, if it can be cheaply computed

Creates an iterator returning an interval of the values produced by this iterator.

Creates an optionally bounded slice, unbounded if until is negative.

Returns an iterator which presents a "sliding window" view of this iterator. The first argument is the window size, and the second argument step is how far to advance the window on each iteration. The step defaults to 1.

The default GroupedIterator can be configured to either pad a partial result to size size or suppress the partial result entirely.

Example usages:

// Returns List(List(1, 2, 3), List(2, 3, 4), List(3, 4, 5))
(1 to 5).iterator.sliding(3).toList
// Returns List(List(1, 2, 3, 4), List(4, 5))
(1 to 5).iterator.sliding(4, 3).toList
// Returns List(List(1, 2, 3, 4))
(1 to 5).iterator.sliding(4, 3).withPartial(false).toList
// Returns List(List(1, 2, 3, 4), List(4, 5, 20, 25))
// Illustrating that withPadding's argument is by-name.
val it2 = Iterator.iterate(20)(_ + 5)
(1 to 5).iterator.sliding(4, 3).withPadding(it2.next).toList

Splits this Iterator into a prefix/suffix pair according to a predicate.

Splits the iterator into a sequence of disjunct views.

Returns a sequence of split iterators, each iterating over some subset of the elements in the collection. These subsets are disjoint and should be approximately equal in size. These subsets are not empty, unless the iterator is empty in which case this method returns a sequence with a single empty iterator. If the splitter has more than two elements, this method will return two or more splitters.

Implementors are advised to keep this partition relatively small - two splitters are already enough when partitioning the collection, although there may be a few more.

Note: this method actually invalidates the current splitter.

Sums up the elements of this collection.

A read only tag specific to the signalling object. It is used to give specific workers information on the part of the collection being operated on.

Selects first n values of this iterator.

Takes longest prefix of values produced by this iterator that satisfy a predicate.

Converts this traversable or iterator into another by copying all elements.

Note: will not terminate for infinite iterators.

Converts this traversable or iterator to an array.

Note: will not terminate for infinite iterators.

Uses the contents of this traversable or iterator to create a new mutable buffer.

Note: will not terminate for infinite-sized collections.

Converts this traversable or iterator to an indexed sequence.

Note: will not terminate for infinite-sized collections.

Converts this traversable or iterator to an iterable collection. Note that the choice of target Iterable is lazy in this default implementation as this TraversableOnce may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

Note: will not terminate for infinite-sized collections.

Returns an Iterator over the elements in this traversable or iterator. Will return the same Iterator if this instance is already an Iterator.

Note: will not terminate for infinite iterators.

Converts this traversable or iterator to a list.

Note: will not terminate for infinite-sized collections.

Converts this traversable or iterator to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

Note: will not terminate for infinite iterators.

Converts this traversable or iterator to a sequence. As with toIterable, it's lazy in this default implementation, as this TraversableOnce may be lazy and unevaluated.

Note: will not terminate for infinite-sized collections.

Converts this traversable or iterator to a set.

Note: will not terminate for infinite-sized collections.

Converts this traversable or iterator to a stream.

Converts this iterator to a string.

Converts this traversable or iterator to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite iterators.

Converts this traversable or iterator to a Vector.

Note: will not terminate for infinite-sized collections.

Creates an iterator over all the elements of this iterator that satisfy the predicate p. The order of the elements is preserved.

Note: withFilter is the same as filter on iterators. It exists so that for-expressions with filters work over iterators.

Creates an iterator formed from this iterator and another iterator by combining corresponding values in pairs. If one of the two iterators is longer than the other, its remaining elements are ignored.

Creates an iterator formed from this iterator and another iterator by combining corresponding elements in pairs. If one of the two iterators is shorter than the other, placeholder elements are used to extend the shorter iterator to the length of the longer.

Creates an iterator that pairs each element produced by this iterator with its index, counting from 0.

Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.

Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (5 /: a)(_+_)
b: Int = 15

scala> val c = (5 /: a)((x,y) => x + y)
c: Int = 15

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.

Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (a :\ 5)(_+_)
b: Int = 15

scala> val c = (a :\ 5)((x,y) => x + y)
c: Int = 15

Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).