Test two objects for inequality.

Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

Efficiently appends the entire remaining input.

Note: This function may temporarily load the entire buffer into memory.

Appends all elements of this collection to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this collection without any separator string.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> val h = a.addString(b)
h: StringBuilder = 1234

Appends all elements of this collection to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this collection, separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b, ", ")
res0: StringBuilder = 1, 2, 3, 4

Cast the receiver object to be of type T0.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

Creates a buffered iterator from this iterator.

Create a copy of the receiver object.

The default implementation of the clone method is platform dependent.

The close() method closes the underlying resource.

Builds a new iterator by applying a partial function to all elements of this iterator on which the function is defined.

Finds the first element of the collection for which the given partial function is defined, and applies the partial function to it.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether this iterator contains a given value as an element.

Note: may not terminate for infinite iterators.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with at most len elements of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached, or len elements have been copied.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with values of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with values of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached.

Tests whether every element of this collection's iterator relates to the corresponding element of another collection by satisfying a test predicate.

Counts the number of elements in the collection which satisfy a predicate.

description of this source, default empty

Builds a new iterator from this one without any duplicated elements on it.

Builds a new iterator from this one without any duplicated elements as determined by == after applying the transforming function f.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Creates two new iterators that both iterate over the same elements as this iterator (in the same order). The duplicate iterators are considered equal if they are positioned at the same element.

Given that most methods on iterators will make the original iterator unfit for further use, this methods provides a reliable way of calling multiple such methods on an iterator.

Tests whether the argument (that) is a reference to the receiver object (this).

The eq method implements an equivalence relation on non-null instances of AnyRef, and has three additional properties:

• It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false.
• For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
• null.eq(null) returns true.

When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

The equality method for reference types. Default implementation delegates to eq.

See also equals in scala.Any.

Tests whether a predicate holds for at least one element of this collection.

Note: may not terminate for infinite-sized collections.

Selects all elements of this iterator which satisfy a predicate.

Selects all elements of this iterator which do not satisfy a predicate.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the finalize method is invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

Finds the first element of the collection satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Builds a new iterator by applying a function to all elements of this iterator and using the elements of the resulting collections.

For example:

def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

The type of the resulting collection is guided by the static type of iterator. This might cause unexpected results sometimes. For example:

// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap ((word: String) => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)

Converts this iterator of traversable collections into a iterator formed by the elements of these traversable collections.

The resulting collection's type will be guided by the type of iterator. For example:

val xs = List(
           Set(1, 2, 3),
           Set(1, 2, 3)
         ).flatten
// xs == List(1, 2, 3, 1, 2, 3)

val ys = Set(
           List(1, 2, 3),
           List(3, 2, 1)
         ).flatten
// ys == Set(1, 2, 3)

Folds the elements of this collection using the specified associative binary operator. The default implementation in IterableOnce is equivalent to foldLeft but may be overridden for more efficient traversal orders.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite-sized collections.

Applies a binary operator to a start value and all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this collection and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Tests whether a predicate holds for all elements of this collection.

Note: may not terminate for infinite-sized collections.

Apply f to each element for its side effects Note: [U] parameter needed to help scalac's type inference.

Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

Returns the runtime class representation of the object.

Returns an iterator who returns lines (NOT including newline character(s)). It will treat any of \r\n, \r, or \n as a line separator (longest match) - if you need more refined behavior you can subclass Source#LineIterator directly.

Returns an iterator which groups this iterator into fixed size blocks. Example usages:

// Returns List(List(1, 2, 3), List(4, 5, 6), List(7)))
(1 to 7).iterator.grouped(3).toList
// Returns List(List(1, 2, 3), List(4, 5, 6))
(1 to 7).iterator.grouped(3).withPartial(false).toList
// Returns List(List(1, 2, 3), List(4, 5, 6), List(7, 20, 25)
// Illustrating that withPadding's argument is by-name.
val it2 = Iterator.iterate(20)(_ + 5)
(1 to 7).iterator.grouped(3).withPadding(it2.next).toList

Returns true if this source has more characters.

The hashCode method for reference types. See hashCode in scala.Any.

Returns the index of the first occurrence of the specified object in this iterable object after or at some start index.

Note: may not terminate for infinite iterators.

Returns the index of the first occurrence of the specified object in this iterable object.

Note: may not terminate for infinite iterators.

Tests whether the iterator is empty.

Note: Implementations in subclasses that are not repeatedly traversable must take care not to consume any elements when isEmpty is called.

Test whether the dynamic type of the receiver object is T0.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

Tests whether this collection can be repeatedly traversed. Always true for Iterables and false for Iterators unless overridden.

the actual iterator

Iterator can be used only once

Builds a new iterator by applying a function to all elements of this iterator.

Finds the largest element.

Finds the first element which yields the largest value measured by function f.

Finds the first element which yields the largest value measured by function f.

Finds the largest element.

Finds the smallest element.

Finds the first element which yields the smallest value measured by function f.

Finds the first element which yields the smallest value measured by function f.

Finds the smallest element.

Displays all elements of this collection in a string.

Delegates to addString, which can be overridden.

Displays all elements of this collection in a string using a separator string.

Delegates to addString, which can be overridden.

Displays all elements of this collection in a string using start, end, and separator strings.

Delegates to addString, which can be overridden.

Equivalent to !(this eq that).

Returns next character.

Wraps the value of next() in an option.

Tests whether the collection is not empty.

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

A copy of this iterator with an element value appended until a given target length is reached.

Partitions this iterator in two iterators according to a predicate.

Returns this iterator with patched values. Patching at negative indices is the same as patching starting at 0. Patching at indices at or larger than the length of the original iterator appends the patch to the end. If more values are replaced than actually exist, the excess is ignored.

Multiplies up the elements of this collection.

Reduces the elements of this collection using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Reduces the elements of this collection, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this collection, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this collection, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Reports an error message to the output stream out.

The reset() method creates a fresh copy of this Source.

Produces a iterator containing cumulative results of applying the operator going left to right, including the initial value.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The size of this collection.

Note: will not terminate for infinite-sized collections.

Selects an interval of elements. The returned iterator is made up of all elements x which satisfy the invariant:

from <= indexOf(x) < until

Note: might return different results for different runs, unless the underlying collection type is ordered.

Creates an optionally bounded slice, unbounded if until is negative.

Returns an iterator which presents a "sliding window" view of this iterator. The first argument is the window size, and the second argument step is how far to advance the window on each iteration. The step defaults to 1.

The default GroupedIterator can be configured to either pad a partial result to size size or suppress the partial result entirely.

Example usages:

// Returns List(List(1, 2, 3), List(2, 3, 4), List(3, 4, 5))
(1 to 5).iterator.sliding(3).toList
// Returns List(List(1, 2, 3, 4), List(4, 5))
(1 to 5).iterator.sliding(4, 3).toList
// Returns List(List(1, 2, 3, 4))
(1 to 5).iterator.sliding(4, 3).withPartial(false).toList
// Returns List(List(1, 2, 3, 4), List(4, 5, 20, 25))
// Illustrating that withPadding's argument is by-name.
val it2 = Iterator.iterate(20)(_ + 5)
(1 to 5).iterator.sliding(4, 3).withPadding(it2.next).toList

Splits this iterator into a prefix/suffix pair according to a predicate.

Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Splits this collection into a prefix/suffix pair at a given position.

Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns a Stepper for the elements of this collection.

The Stepper enables creating a Java stream to operate on the collection, see scala.jdk.StreamConverters. For collections holding primitive values, the Stepper can be used as an iterator which doesn't box the elements.

The implicit StepperShape parameter defines the resulting Stepper type according to the element type of this collection.

• For collections of Int, Short, Byte or Char, an IntStepper is returned
• For collections of Double or Float, a DoubleStepper is returned
• For collections of Long a LongStepper is returned
• For any other element type, an AnyStepper is returned

Note that this method is overridden in subclasses and the return type is refined to S with EfficientSplit, for example IndexedSeqOps.stepper. For Steppers marked with scala.collection.Stepper.EfficientSplit, the converters in scala.jdk.StreamConverters allow creating parallel streams, whereas bare Steppers can be converted only to sequential streams.

Sums up the elements of this collection.

Selects the first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Applies a side-effecting function to each element in this collection. Strict collections will apply f to their elements immediately, while lazy collections like Views and LazyLists will only apply f on each element if and when that element is evaluated, and each time that element is evaluated.

Given a collection factory factory, convert this collection to the appropriate representation for the current element type A. Example uses:

xs.to(List) xs.to(ArrayBuffer) xs.to(BitSet) // for xs: Iterable[Int]

Convert collection to array.

Converts this iterator to a string.

Creates an iterator over all the elements of this iterator that satisfy the predicate p. The order of the elements is preserved.

Note: withFilter is the same as filter on iterators. It exists so that for-expressions with filters work over iterators.

Change or disable the positioner.

Zips this iterator with its indices.

A Position implementation which ignores errors in the positions.

Tests whether this iterator is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream, the predicate returns true if all elements have been computed. It returns false if the stream is not yet evaluated to the end. Non-empty Iterators usually return false even if they were created from a collection with a known finite size.

Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that hasDefiniteSize returns true. However, checking hasDefiniteSize can provide an assurance that size is well-defined and non-termination is not a concern.