Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (5 /: a)(_+_)
b: Int = 15

scala> val c = (5 /: a)((x,y) => x + y)
c: Int = 15

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (a :\ 5)(_+_)
b: Int = 15

scala> val c = (a :\ 5)((x,y) => x + y)
c: Int = 15

Aggregates the results of applying an operator to subsequent elements.

This is a more general form of fold and reduce. It is similar to foldLeft in that it doesn't require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.

aggregate splits the collection or iterator into partitions and processes each partition by sequentially applying seqop, starting with z (like foldLeft). Those intermediate results are then combined by using combop (like fold). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so combop may be invoked an arbitrary number of times (even 0).

As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, seqop transforms each input character to an Int and adds it to the sum (of the partition). Then, combop just needs to sum up the intermediate results of the partitions:

List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })

Selects an element by its index in the general sequence.

Example:

scala> val x = List(1, 2, 3, 4, 5)
x: List[Int] = List(1, 2, 3, 4, 5)

scala> x(3)
res1: Int = 4

A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.

Tests whether every element of this general sequence relates to the corresponding element of another sequence by satisfying a test predicate.

Counts the number of elements in the collection or iterator which satisfy a predicate.

Builds a new general sequence from this general sequence without any duplicate elements.

Note: will not terminate for infinite-sized collections.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether this general sequence ends with the given sequence.

Note: will not terminate for infinite-sized collections.

Tests whether a predicate holds for at least one element of this collection or iterator.

Note: may not terminate for infinite-sized collections.

Selects all elements of this general collection which satisfy a predicate.

Selects all elements of this general collection which do not satisfy a predicate.

Finds the first element of the collection or iterator satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Folds the elements of this collection or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite-sized collections.

Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Tests whether a predicate holds for all elements of this collection or iterator.

Note: may not terminate for infinite-sized collections.

Returns the runtime class representation of the object.

Partitions this general collection into a map of general collections according to some discriminator function.

Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general collection.

Tests whether this collection or iterator is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream, the predicate returns true if all elements have been computed. It returns false if the stream is not yet evaluated to the end. Non-empty Iterators usually return false even if they were created from a collection with a known finite size.

Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that hasDefiniteSize returns true. However, checking hasDefiniteSize can provide an assurance that size is well-defined and non-termination is not a concern.

Selects the first element of this general collection.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Optionally selects the first element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Finds index of the first element satisfying some predicate after or at some start index.

Note: may not terminate for infinite-sized collections.

Selects all elements except the last.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether the collection or iterator is empty.

Note: Implementations in subclasses that are not repeatedly traversable must take care not to consume any elements when isEmpty is called.

Tests whether this general collection can be repeatedly traversed.

Selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Finds index of last element satisfying some predicate before or at given end index.

Optionally selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The length of the general sequence.

Note: will not terminate for infinite-sized collections.

Note: xs.length and xs.size yield the same result.

Displays all elements of this collection or iterator in a string.

Displays all elements of this collection or iterator in a string using a separator string.

Displays all elements of this collection or iterator in a string using start, end, and separator strings.

Tests whether the collection or iterator is not empty.

The default par implementation uses the combiner provided by this method to create a new parallel collection.

Partitions this general collection in two general collections according to a predicate.

Reduces the elements of this collection or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Optionally applies a binary operator to all elements of this collection or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this collection or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this collection or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Returns new general sequence with elements in reversed order.

Note: will not terminate for infinite-sized collections.

Computes a prefix scan of the elements of the collection.

Note: The neutral element z may be applied more than once.

Produces a collection containing cumulative results of applying the operator going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Example:

List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)

Computes length of longest segment whose elements all satisfy some predicate.

Note: may not terminate for infinite-sized collections.

The size of this general collection.

Note: will not terminate for infinite-sized collections.

Selects an interval of elements. The returned collection is made up of all elements x which satisfy the invariant:

from <= indexOf(x) < until

Note: might return different results for different runs, unless the underlying collection type is ordered.

Splits this general collection into a prefix/suffix pair according to a predicate.

Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Splits this general collection into two at a given position. Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).

Note: might return different results for different runs, unless the underlying collection type is ordered.

Tests whether this general sequence contains the given sequence at a given index.

Note: If the both the receiver object this and the argument that are infinite sequences this method may not terminate.

Defines the prefix of this object's toString representation.

Selects all elements except the first.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Selects first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Uses the contents of this collection or iterator to create a new mutable buffer.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to an indexed sequence.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to an iterable collection. Note that the choice of target Iterable is lazy in this default implementation as this TraversableOnce may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

Note: will not terminate for infinite-sized collections.

Returns an Iterator over the elements in this collection or iterator. Will return the same Iterator if this instance is already an Iterator.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to a list.

Note: will not terminate for infinite-sized collections.

Converts this general sequence to a sequence. As with toIterable, it's lazy in this default implementation, as this TraversableOnce may be lazy and unevaluated.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to a set.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to a stream.

Converts this collection or iterator to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite-sized collections.

Converts this collection or iterator to a Vector.

Note: will not terminate for infinite-sized collections.

Test two objects for inequality.

Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

Returns a new general sequence containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the general sequence is the most specific superclass encompassing the element types of the two operands.

Example:

scala> val a = List(1)
a: List[Int] = List(1)

scala> val b = List(2)
b: List[Int] = List(2)

scala> val c = a ++ b
c: List[Int] = List(1, 2)

scala> val d = List('a')
d: List[Char] = List(a)

scala> val e = c ++ d
e: List[AnyVal] = List(1, 2, a)

A copy of the general sequence with an element prepended.

Note that :-ending operators are right associative (see example). A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.

Also, the original general sequence is not modified, so you will want to capture the result.

Example:

scala> val x = List(1)
x: List[Int] = List(1)

scala> val y = 2 +: x
y: List[Int] = List(2, 1)

scala> println(x)
List(1)

A copy of this general sequence with an element appended.

A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.

Note: will not terminate for infinite-sized collections.

Example:

scala> val a = List(1)
a: List[Int] = List(1)

scala> val b = a :+ 2
b: List[Int] = List(1, 2)

scala> println(a)
List(1)

Test two objects for equality. The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

Cast the receiver object to be of type T0.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

Builds a new collection by applying a partial function to all elements of this general sequence on which the function is defined.

Copies the elements of this general sequence to an array. Fills the given array xs with at most len elements of this general sequence, starting at position start. Copying will stop once either the end of the current general sequence is reached, or the end of the target array is reached, or len elements have been copied.

Note: will not terminate for infinite-sized collections.

Copies the elements of this general sequence to an array. Fills the given array xs with values of this general sequence, beginning at index start. Copying will stop once either the end of the current general sequence is reached, or the end of the target array is reached.

Note: will not terminate for infinite-sized collections.

Copies the elements of this general sequence to an array. Fills the given array xs with values of this general sequence. Copying will stop once either the end of the current general sequence is reached, or the end of the target array is reached.

Note: will not terminate for infinite-sized collections.

Computes the multiset difference between this general sequence and another sequence.

Note: will not terminate for infinite-sized collections.

The equals method for arbitrary sequences. Compares this sequence to some other object.

Builds a new collection by applying a function to all elements of this general sequence and using the elements of the resulting collections.

For example:

def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

The type of the resulting collection is guided by the static type of general sequence. This might cause unexpected results sometimes. For example:

// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)

Applies a function f to all elements of this general sequence.

Note: this method underlies the implementation of most other bulk operations. It's important to implement this method in an efficient way.

Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

Hashcodes for GenSeq produce a value from the hashcodes of all the elements of the general sequence.

Finds index of first occurrence of some value in this general sequence after or at some start index.

Note: may not terminate for infinite-sized collections.

Finds index of first occurrence of some value in this general sequence.

Note: may not terminate for infinite-sized collections.

Finds index of first element satisfying some predicate.

Note: may not terminate for infinite-sized collections.

Computes the multiset intersection between this general sequence and another sequence.

Note: may not terminate for infinite-sized collections.

Tests whether this general sequence contains given index.

The implementations of methods apply and isDefinedAt turn a Seq[A] into a PartialFunction[Int, A].

Test whether the dynamic type of the receiver object is T0.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

Finds index of last occurrence of some value in this general sequence before or at a given end index.

Finds index of last occurrence of some value in this general sequence.

Note: will not terminate for infinite-sized collections.

Finds index of last element satisfying some predicate.

Note: will not terminate for infinite-sized collections.

Builds a new collection by applying a function to all elements of this general sequence.

Finds the largest element.

Finds the first element which yields the largest value measured by function f.

Finds the smallest element.

Finds the first element which yields the smallest value measured by function f.

A copy of this general sequence with an element value appended until a given target length is reached.

Returns a parallel implementation of this collection.

For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, par takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.

Specific collections (e.g. ParArray or mutable.ParHashMap) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, par takes constant or sublinear time.

All parallel collections return a reference to themselves.

Produces a new general sequence where a slice of elements in this general sequence is replaced by another sequence.

Returns the length of the longest prefix whose elements all satisfy some predicate.

Note: may not terminate for infinite-sized collections.

Multiplies up the elements of this collection.

Builds a new collection by applying a function to all elements of this general sequence and collecting the results in reversed order.

Note: will not terminate for infinite-sized collections.

Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.

Checks if the other iterable collection contains the same elements in the same order as this general sequence.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Note: will not terminate for infinite-sized collections.

The size of this collection or iterator, if it can be cheaply computed

Tests whether this general sequence starts with the given sequence.

Sums up the elements of this collection.

Converts this general sequence into another by copying all elements.

Note: will not terminate for infinite-sized collections.

Converts this general sequence to an array.

Note: will not terminate for infinite-sized collections.

Converts this general sequence to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

Note: will not terminate for infinite-sized collections.

Returns a string representation of the object.

The default representation is platform dependent.

Produces a new sequence which contains all elements of this general sequence and also all elements of a given sequence. xs union ys is equivalent to xs ++ ys.

Another way to express this is that xs union ys computes the order-preserving multi-set union of xs and ys. union is hence a counter-part of diff and intersect which also work on multi-sets.

Note: will not terminate for infinite-sized collections.

A copy of this general sequence with one single replaced element.

Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns a general sequence formed from this general sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Zips this general sequence with its indices.

Note: might return different results for different runs, unless the underlying collection type is ordered.