BigDecimal represents decimal floating-point numbers of arbitrary precision.
By default, the precision approximately matches that of IEEE 128-bit floating
point numbers (34 decimal digits, HALF_EVEN rounding mode). Within the range
of IEEE binary128 numbers, BigDecimal will agree with BigInt for both
equality and hash codes (and will agree with primitive types as well). Beyond
that range--numbers with more than 4934 digits when written out in full--the
hashCode of BigInt and BigDecimal is allowed to diverge due to difficulty
in efficiently computing both the decimal representation in BigDecimal and the
binary representation in BigInt.
When creating a BigDecimal from a Double or Float, care must be taken as
the binary fraction representation of Double and Float does not easily
convert into a decimal representation. Three explicit schemes are available
for conversion. BigDecimal.decimal will convert the floating-point number
to a decimal text representation, and build a BigDecimal based on that.
BigDecimal.binary will expand the binary fraction to the requested or default
precision. BigDecimal.exact will expand the binary fraction to the
full number of digits, thus producing the exact decimal value corresponding to
the binary fraction of that floating-point number. BigDecimal equality
matches the decimal expansion of Double: BigDecimal.decimal(0.1) == 0.1.
Note that since 0.1f != 0.1, the same is not true for Float. Instead,
0.1f == BigDecimal.decimal((0.1f).toDouble).
To test whether a BigDecimal number can be converted to a Double or
Float and then back without loss of information by using one of these
methods, test with isDecimalDouble, isBinaryDouble, or isExactDouble
or the corresponding Float versions. Note that BigInt's isValidDouble
will agree with isExactDouble, not the isDecimalDouble used by default.
BigDecimal uses the decimal representation of binary floating-point numbers
to determine equality and hash codes. This yields different answers than
conversion between Long and Double values, where the exact form is used.
As always, since floating-point is a lossy representation, it is advisable to
take care when assuming identity will be maintained across multiple conversions.
BigDecimal maintains a MathContext that determines the rounding that
is applied to certain calculations. In most cases, the value of the
BigDecimal is also rounded to the precision specified by the MathContext.
To create a BigDecimal with a different precision than its MathContext,
use new BigDecimal(new java.math.BigDecimal(...), mc). Rounding will
be applied on those mathematical operations that can dramatically change the
number of digits in a full representation, namely multiplication, division,
and powers. The left-hand argument's MathContext always determines the
degree of rounding, if any, and is the one propagated through arithmetic
operations that do not apply rounding themselves.
- Companion:
- object
- Source:
- BigDecimal.scala
Value members
Constructors
Concrete methods
Remainder after dividing this by that.
Remainder after dividing this by that.
- Source:
- BigDecimal.scala
Division and Remainder - returns tuple containing the result of divideToIntegralValue and the remainder.
Division and Remainder - returns tuple containing the result of divideToIntegralValue and the remainder. The computation is exact: no rounding is applied.
- Source:
- BigDecimal.scala
Returns the absolute value of this BigDecimal
Returns the absolute value of this BigDecimal
- Source:
- BigDecimal.scala
Returns a new BigDecimal based on the supplied MathContext, rounded as needed.
Returns a new BigDecimal based on the supplied MathContext, rounded as needed.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Byte.
Converts this BigDecimal to a Byte. If the BigDecimal is too big to fit in a Byte, only the low-order 8 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.
- Definition Classes
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Char.
Converts this BigDecimal to a Char. If the BigDecimal is too big to fit in a Char, only the low-order 16 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value and that it always returns a positive result.
- Source:
- BigDecimal.scala
Compares this BigDecimal with the specified BigDecimal
Compares this BigDecimal with the specified BigDecimal
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Double.
Converts this BigDecimal to a Double.
if this BigDecimal has too great a magnitude to represent as a double,
it will be converted to Double.NEGATIVE_INFINITY or
Double.POSITIVE_INFINITY as appropriate.
- Source:
- BigDecimal.scala
Compares this BigDecimal with the specified value for equality.
Compares this BigDecimal with the specified value for equality. Where Float and Double
disagree, BigDecimal will agree with the Double value
- Definition Classes
- Source:
- BigDecimal.scala
Compares this BigDecimal with the specified BigDecimal for equality.
Compares this BigDecimal with the specified BigDecimal for equality.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Float.
Converts this BigDecimal to a Float.
if this BigDecimal has too great a magnitude to represent as a float,
it will be converted to Float.NEGATIVE_INFINITY or
Float.POSITIVE_INFINITY as appropriate.
- Source:
- BigDecimal.scala
Returns the hash code for this BigDecimal.
Returns the hash code for this BigDecimal.
Note that this does not merely use the underlying java object's
hashCode because we compare BigDecimals with compareTo
which deems 2 == 2.00, whereas in java these are unequal
with unequal hashCodes. These hash codes agree with BigInt
for whole numbers up ~4934 digits (the range of IEEE 128 bit floating
point). Beyond this, hash codes will disagree; this prevents the
explicit representation of the BigInt form for BigDecimal values
with large exponents.
- Definition Classes
- Source:
- BigDecimal.scala
Converts this BigDecimal to an Int.
Converts this BigDecimal to an Int. If the BigDecimal is too big to fit in an Int, only the low-order 32 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds, to within precision, the binary representation of a Double.
Tests whether this BigDecimal holds, to within precision, the binary representation of a Double.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds, to within precision, the binary representation of a Float.
Tests whether this BigDecimal holds, to within precision, the binary representation of a Float.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds the decimal representation of a Double.
Tests whether this BigDecimal holds the decimal representation of a Double.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds the decimal representation of a Float.
Tests whether this BigDecimal holds the decimal representation of a Float.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds the exact expansion of a Double's binary fractional form into base 10.
Tests whether this BigDecimal holds the exact expansion of a Double's binary fractional form into base 10.
- Source:
- BigDecimal.scala
Tests whether this BigDecimal holds the exact expansion of a Float's binary fractional form into base 10.
Tests whether this BigDecimal holds the exact expansion of a Float's binary fractional form into base 10.
- Source:
- BigDecimal.scala
Returns true iff this has a zero fractional part, and is within the
range of scala.Byte MinValue and MaxValue; otherwise returns false.
Returns true iff this has a zero fractional part, and is within the
range of scala.Byte MinValue and MaxValue; otherwise returns false.
- Definition Classes
- Source:
- BigDecimal.scala
Returns true iff this has a zero fractional part, and is within the
range of scala.Char MinValue and MaxValue; otherwise returns false.
Returns true iff this has a zero fractional part, and is within the
range of scala.Char MinValue and MaxValue; otherwise returns false.
- Definition Classes
- Source:
- BigDecimal.scala
Returns true iff this has a zero fractional part, and is within the
range of scala.Int MinValue and MaxValue; otherwise returns false.
Returns true iff this has a zero fractional part, and is within the
range of scala.Int MinValue and MaxValue; otherwise returns false.
- Definition Classes
- Source:
- BigDecimal.scala
Returns true iff this has a zero fractional part, and is within the
range of scala.Short MinValue and MaxValue; otherwise returns false.
Returns true iff this has a zero fractional part, and is within the
range of scala.Short MinValue and MaxValue; otherwise returns false.
- Definition Classes
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Long.
Converts this BigDecimal to a Long. If the BigDecimal is too big to fit in a Long, only the low-order 64 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.
- Source:
- BigDecimal.scala
Returns the maximum of this and that, or this if the two are equal
Returns the maximum of this and that, or this if the two are equal
- Source:
- BigDecimal.scala
Returns the minimum of this and that, or this if the two are equal
Returns the minimum of this and that, or this if the two are equal
- Source:
- BigDecimal.scala
Returns a BigDecimal whose value is this ** n.
Returns a BigDecimal whose value is this ** n.
- Source:
- BigDecimal.scala
Returns the precision of this BigDecimal.
Returns the precision of this BigDecimal.
- Source:
- BigDecimal.scala
Remainder after dividing this by that.
Remainder after dividing this by that.
- Source:
- BigDecimal.scala
Returns a BigDecimal rounded according to the supplied MathContext settings, but preserving its own MathContext for future operations.
Returns a BigDecimal rounded according to the supplied MathContext settings, but preserving its own MathContext for future operations.
- Source:
- BigDecimal.scala
Returns a BigDecimal rounded according to its own MathContext
Returns a BigDecimal rounded according to its own MathContext
- Source:
- BigDecimal.scala
Returns a BigDecimal whose scale is the specified value, and whose value is
numerically equal to this BigDecimal's.
Returns a BigDecimal whose scale is the specified value, and whose value is
numerically equal to this BigDecimal's.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a Short.
Converts this BigDecimal to a Short. If the BigDecimal is too big to fit in a Short, only the low-order 16 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.
- Definition Classes
- Source:
- BigDecimal.scala
Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.
Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.
- Source:
- BigDecimal.scala
Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.
Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.
- Source:
- BigDecimal.scala
Like until, but inclusive of the end value.
Like until, but inclusive of the end value.
- Source:
- BigDecimal.scala
Like until, but inclusive of the end value.
Like until, but inclusive of the end value.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.BigInt.
Converts this BigDecimal to a scala.BigInt.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.BigInt if it
can be done losslessly, returning Some(BigInt) or None.
Converts this BigDecimal to a scala.BigInt if it
can be done losslessly, returning Some(BigInt) or None.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.Byte, checking for lost information.
Converts this BigDecimal to a scala.Byte, checking for lost information.
If this BigDecimal has a nonzero fractional part, or is out of the possible
range for a scala.Byte result, then a java.lang.ArithmeticException is
thrown.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.Int, checking for lost information.
Converts this BigDecimal to a scala.Int, checking for lost information.
If this BigDecimal has a nonzero fractional part, or is out of the possible
range for an scala.Int result, then a java.lang.ArithmeticException is
thrown.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.Long, checking for lost information.
Converts this BigDecimal to a scala.Long, checking for lost information.
If this BigDecimal has a nonzero fractional part, or is out of the possible
range for a scala.Long result, then a java.lang.ArithmeticException is
thrown.
- Source:
- BigDecimal.scala
Converts this BigDecimal to a scala.Short, checking for lost information.
Converts this BigDecimal to a scala.Short, checking for lost information.
If this BigDecimal has a nonzero fractional part, or is out of the possible
range for a scala.Short result, then a java.lang.ArithmeticException is
thrown.
- Source:
- BigDecimal.scala
Returns the decimal String representation of this BigDecimal.
Returns the decimal String representation of this BigDecimal.
- Definition Classes
- Source:
- BigDecimal.scala
Returns the size of an ulp, a unit in the last place, of this BigDecimal.
Returns the size of an ulp, a unit in the last place, of this BigDecimal.
- Source:
- BigDecimal.scala
Returns a BigDecimal whose value is the negation of this BigDecimal
Returns a BigDecimal whose value is the negation of this BigDecimal
- Source:
- BigDecimal.scala
Creates a partially constructed NumericRange[BigDecimal] in range
[start;end), where start is the target BigDecimal.
Creates a partially constructed NumericRange[BigDecimal] in range
[start;end), where start is the target BigDecimal. The step
must be supplied via the "by" method of the returned object in order
to receive the fully constructed range. For example:
val partial = BigDecimal(1.0) to 2.0 // not usable yet
val range = partial by 0.01 // now a NumericRange
val range2 = BigDecimal(0) to 1.0 by 0.01 // all at once of course is fine too- Value parameters:
- end
the end value of the range (exclusive)
- Returns:
the partially constructed NumericRange
- Source:
- BigDecimal.scala
Same as the one-argument until, but creates the range immediately.
Same as the one-argument until, but creates the range immediately.
- Source:
- BigDecimal.scala
Inherited methods
Returns true if this is less than that
Returns true if this is less than that
- Inherited from:
- Ordered
- Source:
- Ordered.scala
Returns true if this is less than or equal to that.
Returns true if this is less than or equal to that.
- Inherited from:
- Ordered
- Source:
- Ordered.scala
Returns true if this is greater than that.
Returns true if this is greater than that.
- Inherited from:
- Ordered
- Source:
- Ordered.scala
Returns true if this is greater than or equal to that.
Returns true if this is greater than or equal to that.
- Inherited from:
- Ordered
- Source:
- Ordered.scala
Result of comparing this with operand that.
Result of comparing this with operand that.
- Inherited from:
- Ordered
- Source:
- Ordered.scala
Returns the value of this as a scala.Byte.
Returns the value of this as a scala.Byte. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as a scala.Char.
Returns the value of this as a scala.Char. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as a scala.Double.
Returns the value of this as a scala.Double. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as a scala.Float.
Returns the value of this as a scala.Float. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as an scala.Int.
Returns the value of this as an scala.Int. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as a scala.Long.
Returns the value of this as a scala.Long. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Returns the value of this as a scala.Short.
Returns the value of this as a scala.Short. This may involve rounding or truncation.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala
Should only be called after all known non-primitive types have been excluded.
Should only be called after all known non-primitive types have been excluded. This method won't dispatch anywhere else after checking against the primitives to avoid infinite recursion between equals and this on unknown "Number" variants.
Additionally, this should only be called if the numeric type is happy to be converted to Long, Float, and Double. If for instance a BigInt much larger than the Long range is sent here, it will claim equality with whatever Long is left in its lower 64 bits. Or a BigDecimal with more precision than Double can hold: same thing. There's no way given the interface available here to prevent this error.
- Inherited from:
- ScalaNumericAnyConversions
- Source:
- ScalaNumericConversions.scala